hydrogen,brick,dry,fuel,cell,hho,water,car,stanley,meyers,pwm,pulse,width,modulator,hydrogen,brick,dry,fuel,cell,hho,water,fuel,car,stanley,meyers,pwm,pulse,width,modulator,hydrogen,brick,dry,fuel,cell
HYDROGEN BRICK CELLS!
*** BEST
PRICES ON THE WEB FOR QUALITY CELLS ***
STOP Throwing your money away on "OLD SCHOOL" PVC HHO Cell containers that sell for hundreds of dollars and eventually will fail! Those are out-dated and are a waste of money! To make it worse, the companies and bozos that sell them give you a bunch of crap when you complain and give no warrantee that it will hold up under load. DON'T BUY THEM!
We now have Hydrogen Brick Cells available
at very competitive prices! These cells range
from
13 to 21 plate systems and each one can be configured to suite your needs.
Each cell comes completely assembled using Custom Laser Cut 316L Stainless Steel plates and custom cut WHITE NITRILE (Buna-N) 1/16th inch thick Gaskets with full instructions on how to hook it up. Buna-N is possibly the best gasket material to use. It will not corrode with the KOH you may be using to amp up your cells. It will also withstand high heat temperatures. The unit also comes with 2 attached 90 degree 1/4" thread X 3/8" plastic barb elbows installed in place and ready for hook-up.
- WE DO NOT USE CHEAP 304 STAINLESS STEEL -
Don't believe other sellers claims that not having laser cut plates matters. Trust me. It matters. The smoother the cuts and fittings, the better the perfection of plate spacing will be for producing HHO gas. This spacing is a critical factor.
Any HHO Brick cell with less than 13 plates is basically wasting your time. You need to have at least this many plates to distribute the voltage evenly among the +, - and neutral plates. Less voltage per plate translates into less heat in your cell. That's what you want to achieve.
Each S/S plate is constructed of 20 Gauge 316L Stainless Steel approx. 6" tall x 4" wide and has a tab on each plate for your + and - connections. This makes it easy to re-configure the cell any way you would like by flipping the plates! Plates smaller will not give you as much surface area for HHO production so this is possibly the smallest size steel you would want to use. A 13 plate system will give approx. 390 square inches of 316L Stainless Steel surface area to create HHO!
Unlike
other companies plate systems, all the plates provided in each of our
cells are EXACTLY
THE SAME so you can change the way the
system will
work for you by taking it apart and re-configuring it!
Other systems being sold use NEUTRAL
plates that are cut different than
the power plates so you're pretty much stuck
with what they sell you.
Not with this system! Give you more room to experiment!
You only need a few additional items to complete your cell installation: A Relay switch, available and any Automotive Store, 3/8" hose, available at Home Depot of Lowe's, a reservoir bottle which can be just about any bottle you can find that would fit in your application and simple wiring. This is one of the main reasons we no longer sell kits with a bottle. Too many complaints about not having enough room to install it or it's too big!
Here's some brick cell configuration designs we have available:
Prices are as follows:
|
13 PLATE BRICK: $229.95 |
17 PLATE BRICK: $289.95 |
|
21 PLATE BRICK: $349.95 |
Each cell is held together with 1/4" 20 Threaded Rod, Nuts and Washers. They are easy to disassemble and reconfigure to your needs. We use High Temperature Clear Plexiglas for the front and rear of each cell so you can see the HHO in action as it is being created!
Properly configured and with the correct mixture of water and KOH (electrolyte), you are sure to get well over 1 Liter of Hydrogen gas Per Minute running at about 15-20 amps! We've heard some brick cells getting upwards of 5 Liters Per Minute! We can give you tips on how to get your water to the proper amperage for efficient operation.
Please allow approx. 10 days to receive your
Brick Cell as we
have to assemble each unit and do bench testing
for leaks prior to shipping!
Your Brick cell will be shipped Priority Mail!
We can quote you for a larger plate system on a custom application. If interested, just ask!
Same Shipping Price For Multiple Units! Thank you for looking!
** OUR SERVICE / PRODUCT GUARANTEE **
WE ARE SO SURE YOU WILL LOVE THIS CELL THAT WE OFFER A 100% MONEY BACK GUARANTEE FOR ANY REASON IF YOU ARE NOT SATISFIED!
As long as the cell is in
it's original condition and shipped back within 10 days of receipt, we will
honor a refund.
You must contact us in advance to request a Return Authorization prior to
sending it back.
NOTE ON ALL RETURNS:
(Original Shipping / Handling Fees
charged when the unit was shipped to you are non-refundable as well as the
return shipping fees you incur)
You are visitor # to our site compliments of
